Filter
Top Products
26
Making the SYSTEM Settings (SYSTEM Setup)
MIDI OMNI MODE Setting
You can set the MIDI Receive channel to Omni ON, whereby
MIDI is received over any channel; or Omni OFF, whereby
channel 1 is used only.
1. Rotate [AMP TYPE] to select
“CLASSIC I” (MIDI OMNI MODE).
2. Press MEMORY button [1] or [2] to set the MIDI OMNI
MODE.
Finishing the SYSTEM Setup
1. Press [TUNER].
* The settings are stored in the VGA-3 at the time the settings
values are changed. No separate action is needed to save the
settings.
SYSTEM Setup Chart
fig.0221
Memory button Setting
[1] ON
Data can be received on any channel
(Omni On).
[2] OFF
Only MIDI channel 1 is used (Omni
Off).
This will function only with the chan-
nel on the transmitting MIDI device
set to 1.