Filter
Top Products
38
Playing in Patch Mode
In Patch mode, the keyboard and the pads are each used to play a
single sound (patch/rhythm set).
The keyboard controller section and the pad controller section each
have their own sound generator part, and each are connected by
their own MIDI channel. This means you can play separate sounds
on the keyboard and the pads.
To access the Patch Play screen, use the following procedure.
1.
Press [PATCH/RHYTHM].
You will enter Patch mode, and the Patch Play screen appears.
The Fantom-X has two parts; a Keyboard part and a Pad part.
2.
Press [F7 (Part Kbd)] to select the Keyboard part.
fig.05-001.e
3.
Press [F8 (Part Pad)] to select the Pad part.
fig.05-002.e
4.
Press [F6] to switch the Patch Play screen.
This screen simultaneously displays the settings of the
Keyboard part and the Pad part.
fig.05-003_50
Press [F3 (Part Level)] to adjust the volume of the keyboard part
and pad part.
Pressing [F8 (Part Level)] will open a window where you can
adjust the volume of the keyboard part and pad part.
Press [F6] (keyboard part) or [F7] (pad part) to select the part,
and turn the VALUE dial or use [INC][DEC] to adjust the
volume.
Press [F8 (Close)] to close the window.
fig.05-004_50