Sennheiser EM 100 Microphone User Manual


 
Specifications
51
Specifications
RF characteristics
Modulation wideband FM
Frequency ranges 516–558, 566–608, 626–668, 734–776, 780–822,
823–865 MHz (A–E, G, see page 4)
Receiving frequencies 1,680 receiving frequencies,
tuneable in steps of 25 kHz
20 frequency banks, each with up to 12 factory-
preset channels, intermodulation-free
1 frequency bank with up to 12 user programmable
channels
Switching bandwidth 42 MHz
Nominal/peak deviation ±24 kHz/±48 kHz
Receiver principle true diversity
Sensitivity (with HDX, peak deviation) < 2 μV for 52 dBA
rms S/N
Adjacent channel rejection typ. 65 dB
Intermodulation attenuation typ. 65 dB
Blocking 70 dB
Squelch Off, Low: 5 dBμV, Middle: 15 dBμV, High: 25 dBμV
Pilot tone squelch can be switched off
Antenna inputs 2 BNC sockets
AF characteristics
Compander system Sennheiser HDX
EQ presets
Preset 1: “Flat
Preset 2: “Low Cut –3dB at 180Hz
Preset 3: “Low Cut/High boost –3dB at 180Hz
+6 dB at 10 kHz
Preset 4: “High Boost”+6dB at 10kHz