Filter
Top Products
25
Adjusting settings via the operating menu
Setting the mode for the MIC button – “Mute Mode”
Adjusting the transmission power – “RF Power”
Via the “RF Power” menu item, you can adjust the transmis-
sion power in two steps.
Activating/deactivating the pilot tone transmission –
“Pilot Tone”
The radio microphone adds an inaudible signal, known as
the pilot tone, to the transmitted signal. The receiver
detects and evaluates the pilot tone.
The pilot tone supports the receiver’s squelch function
(Squelch) and protects against interference due to
RF signals from other devices.
Setting Function
“AF On/Off” If you press the MIC button, the
audio signal is muted.
“RF On/Off” If you press the MIC button, t
he
radio signal is deactivated
.
“Push To Mute” The audio signal is muted as long as
you press the MIC button.
“Push To Talk”*
* If you select “Push To Talk”, the radio microphone will be
muted until the MIC button is pressed.
For information on how to use the MIC button, refer to
page 14.
The audio signal is activated as long
as you press the MIC button.
“Disabled” The function is deactivated.
It is vital to observe the notes on the supplied
frequency information sheet.
Advanced
Menu
Mute Mode
Mute Mode
Mute Mode
RF On/OffAF On/Off
AF On/Off
Call up
“Mute Mode”
Select the desired
setting
Store the setting
“Stored”
Advanced
Menu
RF Power
Standard
Standard
RF Power
Low
RF Power
Call up
“RF Power”
Select the desired
setting
Store the setting
“Stored”
Name
Advanced
Menu
Pilot Tone
Active
Active
Pilot Tone
Inactive
Pilot Tone
Call up
“Pilot Tone”
Select the desired
setting
Store the setting
“Stored”