Filter
Top Products
E-6
HT-SB200
2008 December 17
HT-SB200_EN-UK_rev4.fm
ENGLISH
EN (9)
Preparation for Use
Speaker preparation
Select from three installation methods according to the preferred
position.
Notes:
z Option 1 or option 2 indicates spike positions based on LCD
TV stand.
z When attaching the spikes, place the speaker on a cushion or
soft cloth to avoid damage.
Caution:
When using these spikes on glossy or slippery table such as on
glass top, stick foot cushions at the bottom of the spikes to avoid
slippage.
Note:
Option 1 or option 2 foot cushion positions based on LCD TV
stand.
Make sure to unplug the AC power lead before installing the speaker or changing the position.
Tighten all spikes as shown
Option 2
Option 1
Using spikes
You may choose from the two different spike lengths provided:
25 mm and 30 mm.
Nuts (secured on 30 mm spikes) must be used when installing
either the 25 mm or 30 mm spikes.
The speaker can be leveled by adjusting the spikes and nuts.
Attach foot cushions as shown
Option 1
Using foot cushions
Option 2