Filter
Top Products
1
ENGLISH
INTRODUCTION
The Twin Proä Wireless System is the finest in its class. This
system will give you excellent performance for years to come.
System Contents
The Twin Pro Wireless System contains the following
components:
• One T88 dual channel wireless receiver
• Two transmitters available in one of three different combina-
tions (see System Combinations below)
• One PS20 (120 Vac) or PS20E (230 Vac) power adapter
• One plastic screwdriver for squelch adjustment
System Combinations
The Twin Pro system includes one of the following three transmit-
ter combinations:
• Two handheld microphone transmitters (includes two swivel
adapters and two anti-roll devices)
or
• Two body-pack transmitters with lavalier microphones
or
• One handheld microphone and one body-pack transmitter
(includes one swivel adapter and one anti-roll device)
DESCRIPTION
T88 Wireless Receiver (Figure 1)
FIGURE 1
1 Power Indicators.
2 RF Signal Indicators. Yellow indicates when RF (radio
frequency) signals are received from the transmitter.
3 Audio Peak Indicators. These lights flicker occasionally
in normal operation. They are ON steadily when the au-
dio input is overloaded.
4 Volume Controllers. Controls the audio output level.
5 Telescoping Antennas. Receive signals from the
transmitters. Make sure the antennas are fully extended
vertically.
6 Power Input Connector. Connects to a PS20 (120 Vac)
or PS20E (230 Vac) power adapter.
7 Independent Audio Output Connectors. There is a
separate, unbalanced 1/4
inch phone jack for each
channel.
FRONT
BACK
1234
5
1234
6
7
7
5