Filter
Top Products
5
SHURE SCM262
DESCRIPTION
The Shure Model SCM262 is a stereo mixer intended for sound rein-
forcement applications that integrate microphones with consumer stereo
products. It incorporates two active-balanced microphone inputs with
three unbalanced stereo aux level inputs.
The SCM262 Stereo Mixer is designed for restaurants, classrooms,
corporate training, aerobics classes, and other situations where a paging/
public announcement system is combined with background music or oth-
er program material.
FEATURES
• Designed to combine paging with background music.
• One active-balanced, XLR microphone input channel.
• One active-balanced XLR microphone and 1/4-in. TRS line in-
put channel.
• Three STEREO INPUT channels
• Stereo AUX level OUTPUTs
• Stereo MIC/LINE OUTPUTs
• BASS and TREBLE tone controls on the master output.
• 1/2-rack chassis.
• 12 V phantom power for condenser microphones.
• Internal power supply.
• Removable power cable.
• Ducking function (defeatable).
• Jukebox mute function (defeatable).
FRONT PANEL
ᕡ MIC Channel Gain Controls, 1-2. Control the gain levels of
the MIC channels and LINE IN 2 (MIC 2).
ᕢ STEREO Channel Gain Controls, 1-3. Control the gain lev-
els from CD players, juke boxes, VCRs, or other consumer
stereo equipment connected to the STEREO inputs.
ᕣ BASS and TREBLE Controls. Control the boost/cut of the
low- and high-frequency of the shelving filters.
ᕤ MASTER Gain Control. Allows adjustment of the overall out-
put gain.
ᕥ POWER Indicator. Lights up to indicate when the unit is
plugged in and receiving power.
NOTE: The SCM262 does not have a power switch. To turn
the unit off, unplug the power cord or use an external power
strip with a switch. However, it can remain plugged in as it uses
very little power when idle.
ᕦ POWER Switch
NOTE: Country dependent
REAR PANEL
ᕡ Power Connector. Accepts 100-120 Vac (SCM262) or 220-
240 Vac (SCM262E).
ᕢ Left/Right MIC/LINE Output Connectors. These 1/4-in. con-
nectors are stereo, balanced outputs for use with professional
audio equipment. Controlled by DIP switch.
ᕣ Left/Right AUX Output Connectors. These phono jacks are
stereo, unbalanced outputs for use with consumer stereo
equipment.
ᕤ DIP Switches. These allow you to adjust the SCM262 for
specific applications. See DIP Switches.
ᕥ Left/Right STEREO INPUTS, 1-3. These phono jacks are
stereo inputs for connection to consumer stereo devices.
ᕦ MIC Channel 2 INPUT. Microphone channel 2 has two
available inputs. There is a 1/4-in. connector for balanced/
unbalanced line-level connections, or an XLR connector for
balanced mic-level connections.
ᕧ MIC Channel 1 INPUT. This is an XLR connector for bal-
anced mic-level connections.
2 3 4 5
6
1
1 2 3 4 5 6 7