Shure WH30XLR Microphone User Manual


 
5
English
3. Wash the headband in mild, soapy water and rinse it in clean water.
4. Allow the headband to air-dry thoroughly.
5. Slide the headband around the wireframe to its original position. Reattach the
cable with the plastic retainer.
WASHING THE FOAM WINDSCREEN
The foam windscreen protects the WH30’s microphone-element from dirt
and moisture. When necessary, it can be removed and cleaned in a mild soapy
water solution. Important: Never clean the windscreen with any liquid solution
without first removing the windscreen from the microphone boom.
1. Hold the windscreen loosely by the plastic retaining ring at its base.
2. Gently pull the windscreen away from microphone. The plastic retaining ring
will expand to allow the windscreen to slip off the microphone. If necessary,
you can expand the ring manually with a small screwdriver as you pull the
windscreen.
3. Immerse the windscreen in mild soapy water and gently squeeze it several
times.
4. Rinse the windscreen in clean water and dry it with a clean cloth or paper tow-
el. Allow it to air-dry thoroughly.
5. When the windscreen is dry, slide it over the WH30 microphone until the re-
taining ring snaps into place.
CERTIFICATION
The WH30XLR conforms to European EMC Directive 89/336/EEC, and is eligible to bear the
CE marking. Meets applicable tests and performance criteria in European standard EN 55103
(1996) parts 1 and 2, for residential (E1) and light industrial (E2) environments. The WH30TQG
conforms to European EMC Directive 89/33/EEC, and is eligible to bear the CE marking. Meets
EMC require–ments as an ancillary device per EN 300 445 (1996)
REPLACEMENT PARTS
Cable Connector (for WH30TQG only) WA330. . . . . . . . . . . . . . . . . . . . . . . . . . .
Connector Belt Clip (for WH30XLR only) RK200BC. . . . . . . . . . . . . . . . . . . . . . .
Elastic Headband 80A505B. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Wireframe, Headband, Boom Hinge, Boom, Shock Mount,
Cartridge Housing and Cable RPM520. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Preamplifier Assembly RPM420. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Black Windscreens (2) and Clothing Clip 90WP1371. . . . . . . . . . . . . . . . . . . . . .