Filter
Top Products
12
9) Once the code has been successfully transferred click on the ‘Save’ button to store the new software – this takes
approximately 60 seconds. A progress bar allows you to observe the saving process. During this time it is important
that power to AWS is not interrupted. To enable new software to be written into flash memory AWS must first erase
the current software. If this process is interrupted by a power failure the AWS will be left with no valid software.
In this state AWS will be unable to re-boot. Should this happen the AWS CPU will default to a MIDI download state
and you will have to repeat the download process.
10) Once the software has been saved a ‘Please Re-Power Your Console’ message will appear.
11) Switch power off, wait 10 seconds, and then reapply power to reboot your console.