Filter
Top Products
M.212 SPECIFICATIONS
Input / output impedance & sensitivity: (Master 0 dBV output, load= 100k ohm, Max, Gain, EQ flat)
Line 10k ohm /-14 dBV (200 mV) +/-2 dB
Phono 47k ohm /-50 dBV (3.16mV) +/-2 dB
Mic 2.2k ohm /-60 dBV (1mV) +/-2 dB
Master 1k ohm
Phones 33 ohm / 0 dBV (1V) ±2 dB
Max. output (THD= 1%, Maximum gain, EQ flat)
Master More than +18 dBV (8.0V) at load= 100k ohm
Phones More than +4 dBV (1.6V) at load= 32 ohm
Channel balance: Within 3dB
Frequency response: (Master output, EQ flat)
Line 20-20 kHz +/- 2 dB
Phono 20-20 kHz +2, -3 dB (RIAA)
Mic 20-20 kHz +2/-3 dB
S/N ratio: (Maximum gain, master 0 dBV output, EQ flat, w/20 kHz LPF, A-weighted)
Line Less than -80 dBV
Phono Less than -70 dBV
Mic Less than -60 dBV
THD + N: (Master 0 dBV output, maximum gain, w/ 20 kHz LPF)
Line Less than 0.05% 20 - 20 kHz
Phono Less than 0.1% 20 - 20 kHz (IEC-A WTD)
Mic Less than 0.2% 20 - 20 kHz (IEC-A WTD)
Phones Less than 0.1% 20 - 20 kHz (From line input)
Crosstalk: (From master output, A-weighted)
Line/Phono More than 70 dB at 1 kHz between L and R
More than 70 dB at 1 kHz between channels
MIC EQ:
Hi 10 +/- 2 dB at 10 kHz
-10 +/- 2 dB at 10 kHz
Low 10 +/- 2 dB at 100 Hz
-10 +/- 2 dB at 100 Hz
Channel EQ:
Hi 9 +/- 2 dB at 13 kHz
-15 +/- 3 dB at 13 kHz
Mid 9 +/- 2 dB at 1 kHz
Less than -23 dB at 1 kHz
Low 9 +/- 2 dB at 70 Hz
-26 +/- 3 dB at 70 Hz
Power Source: DC 6V
Dimensions: 230 (W) X 267 (D) X 111 (H) mm
Weight: 1.65 kg
5