Filter
Top Products
Input / output impedance & sensitivity: (Master 0dBV output, load=100Kohm, Max. gain, EQ flat)
Line 10K ohm /-14dBV (200mV) +/-2dB
Phono 47K ohm /-50dBV (3.16mV) +/-2dB
Mic 2.2K ohm /-60dBV (1mV) +/-2dB
Master 1K ohm
Phones 33 ohm / 0dBV (1V) ±2dB
Max. output (THD=1%, Maximum gain, EQ flat)
Master More than +18dBV (8.0V) at load=100K ohm
Phones More than +4dBV (1.6V) at load=32 ohm
Channel balance Within 3dB
Frequency response: (Master output, EQ flat)
Line 20-20KHz +/- 2dB
Phono 20-20KHz +2, -3dB (RIAA)
Mic 20-20KHz +2/-3dB
S/N ratio: (Maximum gain, master 0dBV output, EQ flat, w/ 20KHz LPF, A-weighted)
Line Less than -80dBV
Phono Less than -70dBV
Mic Less than -60dBV
THD + N: (Master 0dBV output, maximum gain, w/ 20KHz LPF)
Line Less than 0.05% 20 - 20KHz
Phono Less than 0.1% 20 - 20KHz (IEC-A WTD)
Mic Less than 0.2% 20 - 20KHz (IEC-A WTD)
Phones Less than 0.1% 20 - 20KHz (From line input)
Crosstalk: (From master output, A-weighted)
Line/Phono More than 70dB at 1KHz between L and R
More than 70dB at 1KHz between channels
MIC EQ
Hi 10 +/- 2dB at 10KHz
-10 +/- 2dB at 10KHz
Low 10 +/- 2dB at 100Hz
-10 +/- 2dB at 100Hz
Channel EQ
Hi 9 +/- 2dB at 13KHz
-15 +/- 3dB at 13KHz
Mid 9 +/- 2dB at 1KHz
Less than -23dB at 1KHz
Low 9 +/- 2dB at 70Hz
-26 +/- 3dB at 70Hz
Power Source AC 9V,1000mA
Dimensions 230 (W) X 267 (D) X 111 (H) mm
Weight 1.65Kgs
M.212 SPECIFICATIONS
7