Filter
Top Products
DESCRIPTION OF FUNCTIONS
Power: This is the power switch to turn the mixer "ON" or "OFF"
AC IN: This is the Input connection for the included power supply.
Send and Return: These connectors are used to connect an outboard
signal processor (such as the Stanton DFX-1). Connect a 1/4” mono
cable from the SEND output to the Line In on your signal processor.
Connect the RETURN input to the Line Out on your signal processor.
Your effects loop should now be working. Check it by turning the send
and return volume knobs to the center position (12 o’clock) and select-
ing FX LOOP on any of the mixer’s channels.
Line: Line inputs (represented by the letter L, followed by the input
number) are used to connect to line level sources such as CD players,
Mini Discs, DATs, samplers, etc.
TT: TT (or phono) inputs are used to connect to turntables.
Ground: Connects to the turntable ground cable to eliminate electrical
hum. Ground cables are usually supplied with turntables.
Master: Connects to an amplifier, EQ, crossover, or other outboard sig-
nal processing.
Booth: This is a second output, like the master output. It is usually used
as a separate output in the DJ Booth for the DJ to monitor the mix.
REC: This is the record output.
The output level is static in this case,
there are no volume controls. It is used to connect directly to tape or CD
recorders. The volume can be set from the recording device.