Filter
Top Products
DESCRIPTION OF FUNCTIONS
1. Session Level control: Controls the input level of the session or mic input,
depending on setting of session/ Mic switch (27).
2. Gain: Controls the gain of each input channel. The sensitivity of the gain
faders is adjusted by the phono trim (25) knob on the back of the mixer.
3. Program Reverse: Reverses the signal of input channels 1 and 2. When
switched down, channel 1 will control channel 2’s inputs.
4. Master Volume control: Controls the overall signal output level of the
mixer. The sensitivity of this fader is controlled by the master trim knob
(21).
5. Line Fader Reverse: Reverses the direction of each respective line fader.
When switched down, the channel will be at full volume when the fader is
down. The volume will decrease as the fader is moved upward.
1
2
3
4
8
6
10
12
14
5
7
9
11
13
18
17
15
15
16