Filter
Top Products
STOW MS-70 MIXER — OPERATION MANUAL — REV. #3 (03/26/10) — PAGE 31
STOW MS-70 PLASTER/MORTAR MIXER — MAINTENANCE (MIXER)
Lug Nut Torque Requirements
1. Start all wheel lug nuts by hand.
2. Torque all lug nuts in sequence. See Figure 34. DO NOT
torque the wheel lug nuts all the way down. Tighten each lug
nut in 3 separate passes as defined by Table 10.
3. After first road use, retorque all lug nuts in sequence. Check
all wheel lug nuts periodically.
Figure 34. Wheel Lug Nuts Tightening Sequence
NOTE
stnemeriuqeReuqroTeriT.01elbaT
eziSleehWssaPtsriF
SBL-TF
ssaPdnoceS
SBL-TF
ssaPdrihT
SBL-TF
"2152-0204-5356-05
"3152-0204-5356-05
"4152-0206-05021-09
"
5152-0206-05021-09
"6152-0206-05021-09