Filter
Top Products
TASCAM M-164/M-164FX/M-164UF
23
Using the internal effects (M-164FX and
M-164UF)
M-164FX and M-164UF units have an internal effects
capability that allows the use of an effect without connect-
ing an external effect unit.
These internal effects can be applied by sending signals
from channels 1–6, 7-8 and 9-10 to the AUX 2 bus. The
return signal can be sent to channels 13-14 or 15-16.
AUX 2
knob
AUX MASTER 2
knob
CH 13-14
or
CH 15-16
CH
1-6
7-8
9-10
Internal
effects
Return
signal
1 Use the AUX 2 knob of each channel to adjust the
level of the channel signal sent to the effects.
2 Use the AUX MASTER 2 knob to adjust the overall
level of the signal sent to the effects.
3 Use the EFFECT section rotary knob to select the
effect type. The effect types are explained in the list
below by their corresponding numbers.
No. Effect name Description
1 Hall 1 Bright hall reverb suitable for drums,
guitars and vocals
2 Hall 2 Warm hall reverb suitable for acoustic
guitars, pianos and vocals
3 Room 1 Simulation of a room with hardwood
walls and floor suitable for acoustic
instruments
4 Room 2 Ambience suitable for acoustic mixes
and synth sounds
5 Room 3 Warm room sound suitable for guitars
and rhythm instruments
6 Plate 1 Classic plate reverb suitable for lead
vocals and lead instruments
7 Plate 2 Bright and showy plate reverb suitable
for vocals and drums
8 Plate 3 Short vintage plate reverb suitable for
snare drums and guitars
9 Chorus Stereo chorus suitable for guitars and
pianos
10 Flange Stereo flanger creates a jet-like sound
11 Delay 1 125-ms slapback delay suitable for
vocals and guitars
12 Delay 2 190-ms delay suitable for percussive
arpeggios
13 Chorus/Room 1 Chorus/reverb suitable for guitars,
synths and pianos
14 Chorus/Room 2 Autowah guitar effect with reverb
suitable for lead instruments
15 Vocal Cancel Effect that reduces the lead vocals
from commercial CDs and other
sources
16 Rotary Speaker Emulation of a rotary speaker suitable
for organs and guitars
4 − Using the mixer