Filter
Top Products
TASCAM XS-8 9
4. Specifications English
4. Specifications
LINE IN (PGM1-4): RCA, unbalanced
Input Level: -10dBV
Input impedance: 50kohm
PHONO IN (PGM1-4) RCA, unbalanced
Input Level: -45dBV
Input impedance: 50kohm
MIC INPUT XLR/TRS, balanced
Input Level: -50dBV ~ -30dBV
Input impedance: 1.5kohm
EFFECT/SESSION: RCA, unbalanced
Input Level: 0dBV
Input impedance: 20kohm
EXT INPUT: RCA, unbalanced
Input Level: 0dBV
Input impedance: 20kohm
INSERT (RETURN): TRS, unbalanced
Input Level: 0dBV
Input impedance: 100kohm
MASTER OUT 1: XLR, balanced
Nominal Output Level: 0dBV
Output impedance: 600ohm
MASTER OUT 2: RCA, unbalanced
Nominal Output Level: 0dBV
Output Impedance: 1kohm
REC OUT: RCA, unbalanced
Nominal Output Level: 0dBV
Output Impedance: 10kohm
EFFECT SEND: RCA, unbalanced
Nominal Output Level: 0dBV
Output Impedance: 1kohm
INSERT (SEND): TRS, unbalanced
Nominal Output Level: 0dBV
Output Impedance: 1kohm
PHONES: 230mW, (at 400ohm)
Frequency Response:
LINE IN: 10Hz to 30KHz, -1.0dB
PHONO IN: RIAA, +/-0.5dB
MIC IN: 10Hz to 30KHz, -1.0dB
Signal to Nose Ratio:
LINE IN: 95dB (IHF A WTD)
PHONO IN: 90dB (IHF A WTD)
MIC IN: 75dB (IHF A WTD)
Total Harmonic Distortion:
LINE IN: <0.08%
PHONO IN: <0.09%
MIC IN: <0.15%
EQ
HIGH: 6.5kHz, +10dB ~ -30dB
MID: 1.2kHz, +10dB ~ -25dB
LOW: 200Hz , +10dB ~ -30dB
Power Requirement: 100V-240V(50Hz-60Hz)
Power Consumption: 22VA
Dimension (mm): 265(W) x 80(H) x 360(D)
Weight: 4.8kg
All specifications subject to change without notice.