Filter
Top Products
NonLin2
/
9
EE NN GG LL II SS HH
Release
Range: 0 – 500ms
Sets the Release time (= Decay) of the Reverb Envelope. This is the time the reverb
tail needs to disappear and this is what causes the “gated” effect. For a typical eight-
ies style response, Release should be set at 0-100 ms. The most gated and unnatural
effect is obtained at short Release settings.
Max. range for this parameter depends on the Attack and Hold settings.
Envelope Display
ENVELOPE DISPLAY
The Envelope display is a graphical representation of the 4 envelope parameters and
the wet level. The 4 dotted lines represent the 4 envelope parameters and their posi-
tion in time. Take a vertical line at the handle and move it to the left to decrease the
time for that parameter or to the right to increase the parameter. Moving the horizon-
tal line of the envelope curve up and down changes the wet level of the reverb from
0dB (fully up) to off (fully down).
Note: The total time for Attack, Hold and Release can not exceed 500ms!