Filter
Top Products
11
Operation
1
Connect the unit as described
previously. Press the POWER ON/OFF
button to the in position to turn the unit
on; the POWER ON/OFF button will light.
2
Rotate the FUNCTION control to the
BLUETOOTH position to select the
Bluetooth mode; a tone will sound and
the blue Bluetooth background light will
blink rapidly.
3
If the background is not blinking rapidly,
press and hold the BLUETOOTH button
until it does.
4
Switch on the Bluetooth function of
your Bluetooth compatible device
within three feet of the STVG888W.
You will see “Singing Machine” appear
on your device’s search list.
Note: Please always refer to the user manual of
your Bluetooth device for detailed instructions.
5
Select “Singing Machine” to start
pairing. Wait for completion of the
pairing; a tone will sound and the blue
background light will stop blinking.
Notes:
• If your Bluetooth device prompts you for a
passcode during the pairing process,
please enter “0000” to connect.
• After initial pairing, the unit will stay paired
unless unpaired manually by the user or
erased due to a reset of the devices.
• If your device should become unpaired,
follow the above steps again. If any pairing
issues should occur, unpair the unit on your
Bluetooth device and follow the above steps
again.
Using a Bluetooth Device
u
v
STVG888-ENG-v2_Layout 1 10/9/13 12:00 PM Page 11