Filter
Top Products
12
Operation
6
PLAY/PAUSE: Press the Play/Pause
4;button to start playback.
7
Make sure the Bluetooth device has its
volume set to mid range, then adjust
the volume to a comfortable level
using the MASTER VOLUME control.
Note: If connected to a TV or other audio
source, adjust the volume of the TV using its
own volume control.
8
Connect microphone(s) as shown on
page 5, and slide the ON/OFF switch
to the ON position. Also, if desired, put
your Bluetooth device onto the cradle
after it is paired.
9
Adjust the MIC VOLUME control as
desired. Increasing this control will
increase the volume of the respective
microphone.
10
Adjust the Echo control to add an
echo effect to your voice.
11
Press the AVC (Auto Voice Control)
ON/OFF button to the On position and
the vocals on a multiplex recording will
be muted as soon as the singer begins
singing into the microphone. When
the singer stops singing, the vocals
are automatically unmuted.
IMPORTANT: This feature only works
with multiplex media.
Using a Bluetooth Device
V
U
at
X
ak
W
PLEASE PROVIDE
PICTURE OF MIC
STVG888-ENG-v2_Layout 1 10/9/13 12:00 PM Page 12