Filter
Top Products
WIRELESS MICROPHONE INFORMATION
Warning: Modifying, tampering and adjustment to this unit or replacement of any
transmitter component (crystal, semiconductor, etc.) to this unit that could result in a
violation of the rules.
FCC NOTICE
This wireless microphone system complies with Part 90 of FCC Rules. There is one frequency
available for the system. You must get a licence for the frequency you plan to use before you use
the system.
Please look for this website http://wireless.fcc.gov/uls/ to apply the licence or phone to the
nearest FCC offices and contact them to get the necessary application. Licensibility depends on
how you will use the system.
For RF exposure
“IMPORTANT NOTE: To comply with the FCC RF exposure compliance requirements, no
change to the antenna or the device is permitted. Any change to the antenna or the device could
result in the system exceeding the RF exposure requirements.”
SAFETY INFORMATION
Your wireless microphone contains a low power transmitter. When the EUT is power on and it
sends out radio frequency (RF) signals. In August 1996, the Federal Communications
Commissions (FCC) adopted RF exposure guidelines with safety levels for wireless devices.
IMPORTANT
To maintain compliance with the FCC's RF exposure guidelines hold the transmitter and
antenna at least 1 inch (2.5 centimetres) from your face and speak in a normal voice, with the
antenna pointed up and away from the face. Ensure that the antenna is at least 1 inch (2.5
centimetres) from your body when you using your wireless microphone.
Use only the supplied antenna. Unauthorised antennas, modifications, or attachments could
damage the transmitter and may violate FCC regulations.
19