The Singing Machine STVG-988 Karaoke Machine User Manual


 
TROUBLE SHOOTING GUIDE
SOLUTION
PROBLEM
POSSIBLE CAUSE
No song lyrics appear
on TV screen.
Connect the video cable to the
Singing Machine’s VIDEO OUT
and to the TV VIDEO IN.
Using your TV remote to select
VIDEO input or select the proper
VIDEO input on the TV itself.
(Refer to page E13 under
Common ways to configure your
TV or VCR)
Video cable is not connected
properly to the TV.
Source selector on TV is not
set to VIDEO.
Connect from VIDEO OUT of the
system to the VIDEO IN of your
VCR or connect to an RF
Modulator and then to the TV
cable input. Refer to “Making the
Connections” on page E13.
Check the disc to be sure it is a
CDG. (See page E24 for details.)
Check disc to be sure it is clean.
(See page E20 for cleaning
instructions.)
A CDG is loaded but the
CDG indicator is not lit.
TV does not have video line
input.
Image is blurry.
Camera has not warmed up.
Camera lens is dirty.
Wait a minute for the camera to
warm up.
Clean the camera lens.
Camera lens is out of focus.
Adjust the lens of the camera by
slightly rotating either left or right
until the display is clear. Do not
overturn the lens.
AVC is activated to
Maximum.
Adjust AVC to Minimum.
Balance is not adjusted
properly.
Adjust balance to mid point.
While playing CDG and
singing with the
microphone, the music
or vocal cuts out.
Playing music only track.
Play track that includes music and
vocal.
VERTICAL HOLD Control is
not set correctly.
Adjust the VERTICAL HOLD
Control.
Picture is jumping up.
The Camera Lens is down.
Lift up a Camera Lens.
No image display on
Singing Machine’s
monitor when
attempting to use
camera.
MONITOR Selector is not
set properly.
Set MONITOR Selector to
CAMERA mode.
Lens cap is on. Remove lens cap.
Brightness control not
adjusted properly on Singing
Machine.
Adjust Brightness control on
Singing Machine.
22