Filter
Top Products
AUTO CUE SINGLE
CUE INDICATOR
When the cue point is set the LED will be on.
SINGLE / CONTINUE BUTTON
This button is used to switch between single play, single repeat and all repeat modes.
When the unit is first switched on this mode will be set to OFF, meaning that at the end of the CD's final track
the CD will stop. Press the single/continue button once and the AUTO CUE SINGLE mode will be selected. Set
to this mode the current track will be repeated until it is stopped. Press the single/continue button twice (once
more) and the CONTINUE mode will be selected. In this mode the entire CD will be repeated upon the
conclusion of the final track until it is stopped.
PITCH RANGE ASSIGN SWITCH
This switch changes the pitch range from +/- 8% to +/- 16%.
PITCH RANGE INDICATOR
Indicates the current pitch range selection.
OPEN BUTTON
DISPLAY / STOP BUTTON
When pressed the time indicated on the display will change to display;
Single remain (time remaining until conclusion of the current track).
Single elapse (time elapsed on the current track).
Total remain (time remaining until the conclusion of the final track of the CD).
***If the Display / Stop button is held for more than three (3) seconds the player will go into sleep mode. This
is especially useful in preventing the premature degradation of the units laser. The unit will automatically go
into sleep mode after approximately 10 minutes of inactive use.
REPEAT OFF
Single remain Single elapse Total remain
CONTINUE