Filter
Top Products
10
HOW TO CHANGE THE FADER UNIT
q Remove all fader knobs and the 5 screws which fix the
top panel. (See fig-C)
wRemove the top panel.
qRemove the screws on the fader panel. (See fig-D)
wRemove the fader unit from position in mixer. (See
fig-D)
eCarefully remove the multi-cable connector from
fader unit. (See fig-E)
rAttach multi-cable connector to new fader unit.
tPosition the fader unit carefully and secure with
screws.
HOW TO REMOVE THE TOP PANEL
HOW TO CHANGE THE FADER UNIT
CF-
37PCV
I.F. CURVE SELECT SWITCH
B
A
D
L
L
E
E
V
FADER POSITION
IF-05PCV INPUT FADER CURVE
IF-37PCV
1
3
5
7
21
Use a No. 1 Phillips screwdriver.
Note
When you change any parts, do not loosen the
screws with marking.
Caution
fig-C
fig-D
fig-F
(for IF-05PCV)
fig-Hfig-G
fig-E
CHANGE TO "IF-05PCV"
qRemove the input fader unit "IF-37PCV".
wLoosen 2 screws with marking on IF-37PCV (see fig-
F. 1), and remove the fader panel from fader (VR)
assembly.
eRemove the fader knob of IF-05PCV.
rLoosen 2 screws with marking on IF-05PCV, and
remove the fader panel from fader (VR) assembly.
tInstall the fader panel of IF-37PCV to the fader unit (VR
assembly) of IF-05PCV. (See fig-F. 2)
I.F. CURVE SELECT SWITCH
Adjusts the input fader curve pattern. (See fig-G) You
can select I.F. curve pattern from A, B or C type curve.
(See fig-H)
HOW TO REPLACE THE INPUT FADER UNIT WITH "IF-05PCV"