Filter
Top Products
6
CROSSFADER SECTION
MICROPHONE SECTION
TRANSFORMER TRANSFORMER
CF MODE
B
A
14 13 15
13
CROSS FADER
Mixes the signal assignes by CROSSFADER
ASSIGN(10) to A side of the crossfader and B side.
When the crossfader is set in the center position,
both A and B can be heard. This is a detachable
fader for ease of replacement with CF-50 when it is
worn out.
14
TRANSFORMER SWITCH
With the crossfader moved to either right or left, the
opposite program can be heard instantly by pressing
the opposite transformer button.
15
CF MODE VOLUME
Adjust the crossfader curve. Clockwise rotation give a
gentle crossfade good for long running mixes. Counter
clockwise rotation gives a steep crossfade good for
scratching and cutting.
16
MIC GAIN
Adjusts the input level from each microphone input.
17
MIC SELECTOR
Used to select the microphones to be Master section.
18
MIC EQ (HI,LOW)
Adjusts the HI and LOW frequencies for all
microphones input.
19
MIC LEVEL
Adjusts the input level from all microphones input.
20
TALK OVER LEVEL
When TALK OVER SWITCH
21
is depressed, the
level of all sources excluding the microphone input
are reduced. Reduction level can be adjusted by this
control. Clockwise rotation gives a large reduction
level.
21
TALK OVER SWITCH
When this switch is depressed, the level of all
sources excluding the microphone input are reduced.
HOW TO REPLACE THE CROSS FADER
Remove a knob and four screws which hold the fader
unit.
Take the unit out.
Carefully remove the multi-cable connector from
the fader unit.
Insert the connector to the new fader unit.
Replace the knob and the fader unit and fix it with
screws.
EQ
MAXMIN
MAXMIN
1
2
DJ
MIC
+16dB-16dB
+16dB-16dB
HI
LOW
LEVEL
IN
TALK OVER
GAIN
ON
17
18
16
19
20
21
55/E 00.9.12 4:44 PM 12