Filter
Top Products
15. Damage Requiring Service-Unplug this product
from the wall outlet and refer servicing to
qualified service personnel under the following
conditions:
a. When the power-supply cord or plug is
damaged.
b. If liquid has been spilled or objects have fallen
into the product.
c. If the product has been exposed to rain or
water.
d. If the product dose not operate normally by
following the operating instructions. Adjust
only those controls that are coverd by the
operating instructions as an improper
adjustment of other, controls may result in
damage and will often require extensive work
by a qualified technician to restore the product
to its normal operation.
e. If the product has been dropped or cabinet has
been damaged.
f. When the product exhibits a distinct change in
perfromance-this indicates need for service.
16. Replacement Parts-When replacement parts are
required, be sure the service technician has used
replacement parts specified by the manufacturer
or have the same characterristics as the original
parts. Unauthorized substitutions may result in
fire, electric shock or other hazards.
17. Safety Check-Upon completion of any service or
repairs to product, ask the service technician to
perfrom sefety checks to determine that the
product is in proper operating condition.
18. Carts and Stands-The appliance should be used
only with a cart stand that is recommended by
manufacturer.
19. An appliance and cart combination should be
moved with care. Quick stops, excessive force,
and uneven surfaces may cause the appliance
and cart combination to overturn.
FEATURES
The PMC-CX was built to give Carl Cox what he
always wanted. A solid, reliable, high quality mixer, that
has enough features to allow him to give 110% during
every performance, every time. Specifically the
PMC-CX includes a number of features that will
definitely give you a lot more creative freedom whilst "in
the mix". Such as 3 band isolators & great high, low and
notch filters on each PGM, a master out isolator
section with anti phase and a matrix input control so you
can mix in and out of inputs quickly and easily.
Regardless of your skill level you will find the CX
enjoyable and easy to use because of its layout and
great features, but you will fall in love with it because of
its high quality components and design.
Matrix Input Assign
The matrix input assign on the PMC-CX is an
innovative and useful feature that allows you to select or
route any input source on/to any channel. On the
PMC-CX you are able to route inputs connected on one
channel to any other channel. It is also possible to
route the one input signal across all three PGMs with
this feature, for more information read below.
3 Band Isolators on each PGM
The PMC-CX features a superb 3-band isolator on
each PGM. The isolators on the PMC-CX offer
infinity cut (100%) with a boost of +4dB. This means
that you can cut out 100% of the Low, Mid and Highs or
boost them by 4dB. In addition to being able to make
adjustments using the isolator volume knobs, the
isolator feature is selectable to either on or off. When
used in tandem with the Matrix Input Assign feature a
user can set up the isolator levels for one track across all
three PGMs and then use the input faders or cross
fader to control what is heard (PGM1 = Low cut,
PGM2 = Mid cut & PGM3 = high cut). By using the
system this way there is more precise control and a lot
more room for dynamic (physical) changes in the
frequency structure of a particular track.
SIZE
PMC-CX/E 04.4.26 10:16 AM ページ 5