Filter
Top Products
10
Getting Connected
Using
the UHF-18 as a stand-alone unit
The UHF-18 can be
used with any device that has a 1/4” mic input
.
To connect the UHF-18:
1. Use a 1/4” patch cable to connect the UHF-18 mic out to the 1/4” mic input on you mixer or other device.
2.
Connect the power adapter cable to the
DC power input of the UHF-18 and p
lug
the adapter into the power source
. A
surge protector is recommended.
NOTE:
Use the power adapter only when using the UHF-18 as a stand alone unit as shown above. Connecting the power
adapter when u
sing the UHF-18 as a plug-in module may result in damage to the UHF-18.