Filter
Top Products
12
Descriptions and Functions
Front Panel
1. BNC Antenna Connector -
Connect the antenna here. To attach, press and twist clockwise until the connec
tor latches.
To detach, press and twist counter-clockwise
.
2
. RF Indicator LED -
This LED will turn on when the UHF-18 detects a wireless signal from the wireless microphone.
(When the wireless microphone is switched on)
3
. AF Indicator LED -
Th
is LED will turn on when the UHF-18 detects
an audio signal from th
e wireless microphone.
(When the wireless microphone is spoken or sung into)
4
. Power Indicator LED -
Th
is LED will turn on when the UHF-18
is powered on.
5
. Power/Volume Dial -
Th
is dial will turn on the UHF-18.
Tu
rn the dial clockwis
e
, it will click
, turning the unit on. When the
UHF-1
8 is on, this dial is used to adjust the
volume of the wireless mics. Turn the dial clockwise to increase the volume
and counter-clock
wise to de
and counter-clockwise to deand counter-clock
crease t
he
volume. To turn the UHF-18 off, turn the dial completely
counter-clockwise until i
t
clicks
.
Rear
Panel
1. Power Connector -
When using the UHF-18 as a stand-a
lone unit,
connect the power adapter here
. When using the
UHF-18 as a plug-in module
, this plug is not used.
NOTE: Pluggin
g in the power adapter when using the UHF-18 as a
plug-in module may result in dam
age to the UHF-18.
2
. 1/4” MIC OUT Jack -
When using the UHF-18 as a stand-alone unit, connect a cable from this jack to the mic input on
your mixer or other device. When using the UHF-18 as a plug-in module, this plug is not used.
3
. Multi-Purpose Plug -
When using the UHF-18 as a plug-in module, connect
the multi-purpose cable
from the plug-in slot
to this plug
. When using the UHF-18 as a stand-alone unit, this plug is not used.