Filter
Top Products
15
Operations
Turning On/Off the UHF-6800 Receiver
NOTE: Before turning on the UHF-6800’s power, be sure that it is plugged into a power source. For maximum protec-
tion, use a power strip or surge protector.
To power on:
1. Hold down the POWER button for 2 seconds while the unit is on.
To power off:
1. Hold down the POWER button for 2 seconds
Turning On/Off the UHF-6800 Mic
Slide the power switch to the ON position to turn the mic on and slide it to the OFF position to turn the mic off.
Balancing the Volume
Use the mic volume controls on the front to adjust the balance of the two mic channels. Turn the controls clockwise to
raise the volume and counter-clockwise to lower the volume.
Power Switch
Volume Controls
Power Switch
Volume Controls