Filter
Top Products
8
8. Hi-Fi/Lo-Fi Switch: This switch is designed to Joe’s exacting specifications.
When Hi-Fi is selected, the delay effects are full-range with no EQ. When Lo-Fi is
selected, a high-pass filter and low-pass filter EQ is engaged. This rolls off the
high frequencies cuts the low frequencies. These frequency points are selected
based on Joe's years of live and studio performance as the best EQ points to allow
a delayed guitar tone to sit in the mix.
9. Time: This knob controls the amount of delay time within the value previously
selected with the Delay Range knob. Turn this knob clockwise to increase the
delay time within this range. Turn this knob counter-clockwise to decrease the
delay time within this range.
For extreme psychedelic effects, rotate the time knob back and forth while play-
ing!
10. Feedback: This knob selects the Feedback, or the number of times the delay effect
repeats the original signal. The Feedback control on the Time Machine can pro-
duce just one repeat all the way up to infinite repeats—and everything in
between! For extreme sound effects, set the Feedback to infinite (rotate the Feed-
back knob fully clockwise), play a chord or a riff and then rotate the Time knob
slowly back and forth!
11. Input: This is the 1/4" input. Plug your guitar into this. Connecting a guitar cable
to the "INPUT" jack will turn on the power automatically. For extended battery
life, always unplug your guitar cable from the input when not in use.