Filter
Top Products
7
PRESET LED
PRESET switch
MANUAL LED
Top and rear panels
In this chapter we're going to take a look at the top and rear panels of your
Valvetronix amp.
Top panel
1
2
4
3
5 6
7
8 9
The illustration shows the VT20+.
1. INPUT section
INPUT jack
This is where you plug in your guitar.
2. PRESETS/MANUAL section
PRESET switch and LED, MANUAL LED
Use this to switch to Preset mode or Manual mode,
and to select preset programs (basic, effect, song).
Pressing the PRESET switch repeatedly will cycle
the program among basic, effect, and song. Press the
PRESET switch for more than one second to engage
Manual mode.
In Preset mode you can use the AMP switch/selector to select typical sounds
(preset programs) for each amp model. The PRESET LED will be lit green
(basic), orange (effect), or red (song) when you’re in Preset mode.
In Manual mode, the sound will reflect the physical position of all knobs
except the VALUE and DEPTH knobs. This lets you use the VT20+/VT40+/
VT80+/VT120+ just as if it was a conventional guitar amp. The MANUAL LED
will be lit when you’re in Manual mode.