Filter
Top Products
9
PEDAL selector
VALUE knob
MOD/DELAY selector
TAP LED
TAP switch
DEPTH knob
TUNER (BYPASS) LEDs
BANK switch
BANK LED
TUNER (BYPASS) switch
CHANNEL LED
CHANNEL switch
4. CHANNEL/TUNER section
BANK and CHANNEL switches, LEDs
Use the BANK switch to
select the channel bank.
In Channel Select mode,
the BANK LED will be
lit green or red.
Use the CHANNEL
switches to select
channels. The LED of the selected channel will be lit up. To save a new pro-
gram, hold down the desired CHANNEL switch for two seconds or longer.
If you want to save a new program in a different bank, hold down the BANK
switch for 0.5 seconds or longer (until the BANK LED starts blinking) and
select the desired writing-destination bank (p. 15 “Saving a program”).
When the tuner function is turned on, the BANK and CH 1–4 LEDs will indicate
the string number (a pitch note closest to the input sound) (p. 18 “Using the
tuner”).
TUNER (BYPASS) switch and LED
Pressing the TUNER (BYPASS) switch will turn all effects off (bypass), and
engage the tuner function. If you want to tune your instrument with the amp
output muted, press the TUNER (BYPASS) switch for one second or longer.
When the tuner function is turned on, the TUNER (BYPASS) LEDs will display
the tuning status (p. 18 “Using the tuner”).
5. PEDAL section
Here you can adjust the settings for pedal
effects.
For details on each effect, refer to “Pedal
effects” (p. 26).
PEDAL selector
This selects the effect type. When you switch the effect type, the parameter
settings of the effect will be initialized.
VALUE knob
This adjusts the parameters of each effect.
To turn the pedal effect off, rotate this knob all the way to the left.
6. MODULATION/DELAY section
Here you can adjust the settings for
modulation effects, delay effects, and
other effects, such as pitch shift.
For details on each effect, refer to “Modu-
lation and delay effects” (p. 28).