Filter
Top Products
Insert Patching 127
01V96 Version 2—Owner’s Manual
Input & Output Patching
10
Insert Patching
The 01V96’s Input Channels and Output Channels (Stereo Out, Bus Out 1–8, Aux Out 1–8)
feature independent Insert Ins and Outs. Inputs, outputs, ADAT connector channels, slot
channels, and internal effects processor inputs and outputs can be patched to the Output
Channel Insert Ins and Outs. In this way, you can send the signals to external effects proces-
sors for processing, or insert internal effects.
Individual Insert Patching
You can patch the 01V96’s inputs, outputs, ADAT connector channels, slot channels, and
effects processor inputs and outputs to the Insert Ins and Outs. The same procedure applies
to both Input Channels and Output Channels.
1 Press the [SEL] button of an Input Channel or Output Channel for Insert
patching.
2 Press the [ /INSERT/DELAY] button repeatedly until the /INS/DLY | Insert
page appears.
This page contains the following parameters:
A POSITION
This parameter determines the insert position of the Insert patch or compressor. The
insert position is indicated by highlighted COMP or INSERT buttons.
Effects
Input Output
Output connector Input connector
Insert Out Insert In
Channel
3
1
2