Filter
Top Products
Insert Patching 129
01V96 Version 2—Owner’s Manual
Input & Output Patching
10
Viewing and Changing Insert In Patch
You can view and also change the items patched to the Insert Ins of all Input Channels (or
all Output Channels). This is useful when you wish to find out if multiple channels have the
same patch.
1To view the Input Channels’ Insert Ins, press the [PATCH] button repeatedly
until the Patch | Input Ins page appears.
This page displays Input Channels 1–32 Insert In Patches.
2 Move the cursor to a channel patch parameter box you wish to change, then
rotate the Parameter wheel or press the [INC]/[DEC] buttons to modify the
patching.
3 Press [ENTER] to confirm the change.
4To view the Output Channels’ Insert Ins, press the [PATCH] button repeatedly
until the Patch | Output Ins page appears.
5 Move the cursor to a channel patch parameter box you wish to change, then
rotate the Parameter wheel or press the [INC]/[DEC] buttons to modify the
patching.
6 Press [ENTER] to confirm the change.