Filter
Top Products
Using Mute Group Master 153
01V96 Version 2—Owner’s Manual
Grouping Channels & Linking Parameters
13
• ALL NOMINAL............This button resets the master levels for all Fader groups to nom-
inal.
• ON/OFF.........................This turns each Input Fader group on or off. This function
works like a VCA mute on an analog mixing console.
• Faders ............................These faders adjust the master levels of the Fader groups. Fader
knobs are highlighted when faders are set to 0.0 dB. Press the
[ENTER] button to set the currently-selected fader to 0.0 dB.
You can also control the parameters from the channel strips on the control surface as
described below by using the User Assignable Layer of the Remote Layers. See page 233for
information on the User Assignable Layer.
• [SEL] buttons ...............These buttons move the cursor on the In Master page or Out
Master page.
• [SOLO] buttons ...........These buttons turn the Solo function of each Fader group on
and off. You can monitor all the channels in each Fader group.
• Channel Faders ............The channel faders enable you to set the master level for each
Fader group.
Using Mute Group Master
In addition to the Mute Group function that links the operation of channel [ON] buttons,
the 01V96 features a Mute Group Master function that enables you to mute grouped chan-
nels using the Master Mute buttons in a manner similar to using a mute group on an analog
mixing console. While this function is enabled, the [ON] buttons for grouped channels will
not be linked.
1 After you perform Step 5 in “Using Fader Groups and Mute Groups” on
page 150, use the cursor buttons to select the INPUT MUTE MASTER check
box or OUTPUT MUTE MASTER check box, then press [ENTER] to turn on
the Mute Group Master function.
2 When the Mute Master check box is checked, use the group MASTER MUTE
buttons to mute or unmute the groups.
If channels are muted via the Mute Master function, the channel [ON] button indicators
flash. It is useful if you assign the MASTER MUTE buttons to USER DEFINED KEYS but-
tons.