Filter
Top Products
184 Chapter 16—Libraries
01V96 Version 2—Owner’s Manual
Compressor Library
This library enables you to store and recall settings for the compressors on Input Channels,
Bus Outs 1–8, Aux Outs 1–8, and Stereo Out. The library contains 36 preset memories and
92 user (readable & writable) memories.
Follow the steps below to use the Compressor library.
1 Press the DISPLAY ACCESS [DYNAMICS] button, then press the [F4] button.
The Dynamics | Comp Lib page appears.
A CURRENT TYPE
This parameter displays the currently-selected channel comp type (Compressor,
Expander, Compander Soft, Compander Hard).
B CURRENT CURVE
This graph displays the current compressor curve.
C GR meters
These meters indicate the amount of gain reduction being applied by the compressor,
and the post-comp levels of the currently-selected channel and its available pair partner.
D Type & Curve section
The type and curve of the currently-selected memory is displayed here.
2 Use the LAYER buttons to select layers, then press the [SEL] buttons to select
channels.
You can now store the selected channel comp settings and recall the compressor library
memories to channels. For details on storing and recalling memories, see “General Library
Operation” on page 175. Since ST IN Channels do not feature compressors, if you select an
ST IN Channel, the message “Stereo in has no Comp!” appears on the display.
1
3
4
2