Filter
Top Products
186 Chapter 16—Libraries
01V96 Version 2—Owner’s Manual
EQ Library
This library enables you to store and recall EQ settings for Input Channels, Bus Outs 1–8,
Aux Outs 1–8, and Stereo Out. The library contains 40 preset memories and 160 user (read-
able & writable) memories.
Follow the steps below to use the EQ library.
1 Press the DISPLAY ACCESS [EQ] button, then press the [F2] button.
The EQ | EQ Library page appears.
A CURRENT TYPE
This parameter displays the currently-selected channel EQ type (TYPE I or II).
B CURRENT CURVE
This graph displays the current EQ curve.
C Level meters
These meters indicate the post-EQ levels of the currently-selected channel and its avail-
able pair partner.
D Type & Curve section
The type and curve of the currently-selected EQ program are displayed here.
2 Use the LAYER buttons to select layers, then press the [SEL] buttons to select
channels.
You can now store the selected channel EQ settings or recall the EQ library memories to
channels. For details on storing and recalling memories, see “General Library Operation”
on page 175.
31
Click Erase
EXPAND
Expander for removing a click track that may bleed
through from a musician’s headphones.
32
Announcer
COMPAND-H
Hard-kneed compander for reducing the level of the
music when an announcer speaks.
33
Limiter1
COMPAND-S A soft-kneed compander with a slow release.
34
Limiter2
COMP A “peak-stop” compressor.
35
Total Comp1
COMP
Compressor for reducing the overall volume level. Use
it on the stereo output during mixdown, or with paired
Input or Output Channels.
36
Total Comp2
COMP A variation on preset 35, but with more compression.
No. Preset Name Type Description
1
3
4
2