Filter
Top Products
Pro Tools Remote Layer 193
01V96 Version 2—Owner’s Manual
Remote Control
17
7 Press the LAYER [REMOTE] button.
The Remote Layer is now available for control, enabling you to remotely control Pro Tools.
Display
While the Pro Tools layer is selected, you can use the [F2]–[F4] buttons as well as the left
and right [ ]/[ ] Tab Scroll buttons to select display modes. You can select the follow-
ing display modes using these buttons:
■ Insert Display mode ( [F2] button)
Press the [F2] button to select Insert Display mode. In this mode, you can assign and edit
plug-ins.
A TARGET
This parameter enables you to select the remote control target device.
B COUNTER
This counter indicates the current position. This counter works in unison with the time-
code counter on Pro Tools. The display format of the counter is specified in Pro Tools.
The following three check boxes in the COUNTER section indicate the cur-
rently-selected format.
• TIME CODE: ................Pro Tools timecode format is set to “Time Code.”
• FEET: .............................Pro Tools timecode format is set to “Feet:Frames.”
• BEATS:...........................Pro Tools timecode format is set to “Bars:Beats.”
Note: When the Pro Tools Remote layer is selected, the 01V96’s top panel faders and other
channel buttons are available for remote control. To control the 01V96, you need to select an
Input Channel Layer or the Master Layer.
3
4
5
2
1