Filter
Top Products
MIDI Port Setup 217
01V96 Version 2—Owner’s Manual
MIDI
18
• DEVICE ID ...................Specify the 01V96’s MMC Device ID. MMC Device IDs iden-
tify connected devices, enabling recognition during MMC
transmission and reception.
D SPECIAL FUNCTIONS section
This section enables you to specify ports for various special functions.
• Studio Manager............In the left parameter box, select MIDI, USB or SLOT as the port
used by the included Studio Manager software. In the two small
parameter boxes on the right, specify a port number (if you
selected USB), and an ID number.
• DAW...............................Select USB or SLOT as a port for use with a DAW. Specify in the
right parameter box a port number pair (1–2, 3–4, 5–6, 7–8).
• REMOTE ......................This parameter indicates the target currently selected for
Remote Layer. If the target is set to “USER DEFINED,” you can
select a MIDI message destination port.
• CASCADE LINK ..........This parameter determines whether MIDI messages are trans-
mitted between two cascaded 01V96s. If you select MIDI, MIDI
messages will be transferred between two cascaded units. If you
select “–,” no MIDI messages are transferred.
The TRANSMIT and REQUEST buttons are used to synchro-
nize all parameters that are cascade-linked. The TRANSMIT
button synchronizes the connected 01V96’s parameters to your
primary 01V96’s parameters. The REQUEST button synchro-
nizes your 01V96 parameters to the connected 01V96’s param-
eters.