Yamaha AX16-AT Music Mixer User Manual


 
Installing the AX16-AT
9
AX16-AT—Owner’s Manual
Installing the AX16-AT
The AX16-AT installs into a single PCI or ISA expansion slot and requires no
special jumper settings or interrupt settings. If you are installing in an ISA
slot, see “Fitting the ISA-bus Mounting Bracket” on page 10 before continu-
ing with this procedure.
See your computer’s manual for full details on installing cards.
1
Turn off the computer and disconnect the power cord.
2
Remove the computer’s cover.
3
Choose an empty slot for the AX16-AT, and remove the expan-
sion-slot cover.
To prevent static electricity from damaging the AX16-AT, touch a grounded
metal part of your computer, such as the power supply case, before handling
it.
4
Carefully align and insert the AX16-AT into the slot.
5
If the expansion-slot cover was held in place by a screw, secure the
AX16-AT using the same screw.
Important: Tighten the expansion-slot fixing screw so that the AX16-AT can-
not jiggle about in the slot.
A
A
THRU-A
B
THRU-B
[ THROUGH IO-B ]
B
B
[ THROUGH IO-A ]
A
A
A
IO-A
IO-B
FULL
HALF
OFF
OFF
PCI
ISA