Filter
Top Products
17
Other MIDI Functions
The MIDI functions listed to the right
are engaged by holding down the [MIDI/
TRANSPOSE] button and pressing the
corresponding voice selector. Full details
are given in the following pages.
“Local Control” refers to the fact that, normally, the Clavinova keyboard controls its internal tone generator,
allowing the internal voices to be played directly from the keyboard. This situation is “Local Control ON” since
the internal tone generator is controlled locally by its own keyboard.
Local control can be turned OFF, however, so that the Clavinova keyboard does not play the internal voices,
but the appropriate MIDI information is still transmitted via the MIDI OUT connector when notes are played on
the keyboard. At the same time, the internal tone generator responds to MIDI information received via the MIDI
IN connector.
When using the DOU-10 Disk Orchestra Unit with the Clavinova, for example, Local Control should be
turned OFF when recording using the DOU-10 voices only, and ON when recording the Clavinova voices while
listening to playback of the DOU-10 voices.
Z Hold down the [MIDI/TRANSPOSE] button.
X Press the [PIANO 1] voice selector. If the PIANO 1 LED is lit when
the [PIANO 1] voice selector is pressed, you have turned local control
OFF. If the PIANO 1 LED is not lit when the [PIANO 1] voice selector
is pressed, you have turned local control ON.
C Release the [MIDI/TRANSPOSE] button.
Normally the Clavinova will respond to MIDI program change numbers received from an external keyboard
or other MIDI device, causing the correspondingly numbered Clavinova voice to be selected. The Clavinova
will normally also send a MIDI program change number whenever one of its voices is selected, causing the
correspondingly numbered voice or program to be selected on the external MIDI device if the device is set up to
receive and respond to MIDI program change numbers.
This function makes it possible to cancel program change number reception and transmission so that voices
can be selected on the Clavinova without affecting the external MIDI device, and vice versa.
Z Hold down the [MIDI/TRANSPOSE] button.
X Press the [PIANO 2] voice selector. If the PIANO 2 LED is lit when
the [PIANO 2] voice selector is pressed, you have turned program
change reception/transmission OFF. If the PIANO 2 LED is not lit
when the [PIANO 2] voice selector is pressed, you have turned pro-
gram change reception/transmission ON.
C Release the [MIDI/TRANSPOSE] button.
● Local Control ON/OFF
● Program Change ON/OFF
Function
CLP-154
S CLP-155
Voice Selector Voice Selector
Local Control ON/OFF [PIANO 1] [PIANO 1]
Program Change ON/OFF [PIANO 2] [PIANO 2]
Control Change ON/OFF [CLAVINOVA TONE] [CLAVINOVA TONE]
Multi-Timbre Mode [E. PIANO] [E. PIANO]
MIDI Split & Left Local OFF [HARPSICHORD] [HARPSICHORD]
MIDI Split & Right Local OFF [ORGAN] [VIBES]
Panel Data Transmit - none - [STRINGS]
MIDI FUNCTION CHART
= Program Change OFF
= Program Change ON
MIDI/
TRANSPOSE
PIANO 2
PIANO 2
PIANO 1
PIANO 2
CLAVIN
O
TON
E
= Local Control OFF
= Local Control ON
MIDI/
TRANSPOSE
PIANO 1
PIANO 1
PIANO 1
PIANO 2
CLAVIN
O
TON
E