Filter
Top Products
37
(5) XG Native Bulk Data (reception only)
Data format: [F0H] -> [43H] -> [0nH] -> [4CH] -> [aa] ->
[bb] -> [hh] -> [mm] -> [ll] -> [dd] ->...-> [cc]
-> [F7H]
F0 Exclusive status
43 YAMAHA ID
0n When n is received n=0~F, whichever is received.
When n is transmitted n always=0.
4C Model ID of XG
aa ByteCount
bb ByteCount
hh Address High
mm Address Mid
ll Address Low
dd Data
| |
| |
cc Check sum
F7 End of Exclusive
For information about “Address” and “Byte Count” fields, refer to
attached tables.
In the attached tables “TOTAL SIZE” partitions a data series into
single bulk dumps. The “address” is the first byte of the bulk data.
The checksum value is set such that the sum of Byte Count, Ad-
dress, Data, and Checksum has value zero in its seven least
significant bits.
If too much bulk data is received at a time there is a chance of
error. The total data for a bulk dump should not exceed 512 bytes,
it is recommended that data be kept under 512 bytes with an
interval time of 120msec or more between 512 byte bulk.
(6) Clavinova MIDI Format
Data format: [F0H] -> [43H] -> [73H] -> [3BH] -> [yy] ->
[F7H]
F0 = Exclusive status
43H = Yamaha ID
73H = Clavinova ID
3BH = CLP-555 ID
yy = Substatus
yy Information
02H Internal MIDI clock
03H External MIDI clock
06H Bulk Data
* The bulk data follows 06H.
* When yy=2, 3 or Clavinova common ID (01H) is recog-
nized
as well as 3BH.
BULK DUMP FORMAT
F0H, 43H, 73H
nnH (Product ID: CLP-555=4F)
06H (Bulk ID)
05H (Sequence data, Bulk Dump Format)
0xH, 0xH, 0xH, 0xH (Data length= xxxx bytes)
[BULK DATA] (low, high........low, high)
[CHECK SUM (1byte)] = 0-sum (BULK DATA)
F7H
(7) Special Control
Data format: [F0H] -> [43H] -> [73H] -> [3BH] -> [11H] ->
[0nH] -> [cc] -> [vv] -> [F7H]
43H = Yamaha ID
73H = Clavinova ID
3BH = CLP-555 ID
11H = Clavinova special control
0nH = Control MIDI change + channel number
cc = Control number
vv = Value
Control 0nH ccH dd
Split Point Always 00 14H 14H : Split Key Number
Metronome Always 00 1BH 00H : off
01H : –
02H : 2/4
03H : 3/4
04H : 4/4
05H : 5/4
06H : 6/4
07H : No accent
Channel Detune ch: 00-0F 43H 00H-7FH
Voice Reserve ch: 00-0F 45H 00H : Reserve off
7FH : on *1
*1 When Volume, Expression is received for Reserve On, they will
be effective from the next Key On. Reserve Off is normal.
(8) Others
Data format: [F0H] -> [43H] -> [1nH] -> [27H] -> [30H] ->
[00H] -> [00H] -> [mmH] -> [llH] -> [ccH] ->
[F7H]
Master Tuning (XG and last message priority) simultaneously
changes the pitch of all channels.
F0H = Exclusive Status
43H = Yamaha ID
1nH = Transmission from n=CLP is always 0. 0-F is received.
27H = Model ID of TG100
30H = Sub ID
00H =
00H =
mmH = Master Tune MSB
llH = Master Tune LSB
ccH = don’t care (under 7FH)
F7H = End of Exclusive