Yamaha CVP-83S Musical Instrument User Manual


 
11
Split Balance
Split Mode
8
TEMPO
SPLIT
The volume balance between the left-hand and right-hand voices can be ad-
justed by using the TEMPO [] and [] buttons while holding the [SPLIT] but-
ton. The selected balance value (1 … 15) will be shown on the TEMPO display
while the [SPLIT] and TEMPO [s] or [] buttons are held.
A setting of “1” sets the volume of the left voice to maximum and the right
voice to minimum (no sound).
A setting of “8” sets both voices to the same volume (this is the default balance
setting, and can be recalled by pressing the TEMPO [] and [] buttons si-
multaneously).
A setting of “15” sets the volume of the right voice to maximum and the left
voice to minimum (no sound).
NOTES
The TEMPO [
] and [
] buttons allow two-speed scrolling: press lightly to scroll
through the values slowly, or press firmly to scroll rapidly.
Damper Pedal Operation in the Split Mode
The damper pedal (the right pedal — see “The Pedals” on page 14) can be as-
signed to the left voice only, the right voice only, or to both voices in the split
mode.
Right Voice Only (default): Press the right (damper) pedal while holding the
[SPLIT] button.
Left Voice Only: Press the left (soft) pedal while holding the [SPLIT] button.
Both Voices: Press both the right and left pedals while holding the [SPLIT]
button.
NOTES
The dual and split modes cannot be used at the same time.
In the split the soft and sostenuto pedal functions apply to both the left- and right-
hand voices.
When the ABC Single Finger mode (page 20) and the split mode are used simul-
taneously, the left-hand voice will be accompanied by the appropriate ABC chord
voices.
SPLIT
CVP-87A CVP-85A/83S