Yamaha DD-55 Drums User Manual


 
Appendix
42
NOTE:
*1 Value of Pan for each drum pad and foot pedal is not transmitted via MIDI.
*2 The DD-55 can accept Start/Stop signals, received via MIDI, by setting the MIDI clock to “External”.
*3 This data is transmitted only when it is contained in the song data.
*4 Exclusive
<GM System ON> F0H, 7EH, 7FH, 09H, 01H, F7H
This message automatically restores all default settings for the instrument, with the exception of MIDI
Master Tuning.
<MIDI Master Volume> F0H, 7FH, 7FH, 04H, 01H, ll, mm, F7H
This message allows the volume of all channels to be changed simultaneously (Universal System
Exclusive).
The values of “mm” is used for MIDI Master Tuning. (Values for “ll” are ignored.)
<Reverb Type> F0H, 43H, 1nH, 4CH, 02H, 01H, 00H, mmH, llH, F7H
mm : Reverb Type MSB
ll : Reverb Type LSB
Refer to the Effect Map (page 43) for details.
<Chorus Type> F0H, 43H, 1nH, 4CH, 02H, 01H, 20H, mmH, llH, F7H
mm : Chorus Type MSB
ll : Chorus Type LSB
Refer to the Effect Map (page 43) for details.
<DSP Type> F0H, 43H, 1nH, 4CH, 02H, 01H, 40H, mmH, llH, F7H
mm : DSP Type MSB
ll : DSP Type LSB
Refer to the Effect Map (page 43) for details.
<DRY Level> F0H, 43H, 1nH, 4CH, 08H, 0mH, 11H, llH, F7H
ll : Dry Level
0m : Channel Number
*5 Recording to an external sequencer from the DD-55 and playing back the data may result in selection of a
different Reverb effect or a different kit.
Sending MIDI data from the DD-55 to an external tone generator may result in an unexpected voice, partic-
ularly if the tone generator doesn’t have the same kind of voice as the DD-55.