Filter
Top Products
Recording a Song
29
DD-65/YDD-60 Owner’s Manual
5 Stop Recording.
The recorded User Songs (UO1–UO5) can be played back in the same manner as any song (song
numbers 001–100).
The Song clear operation completely erases all recorded data on all tracks of a selected user song.
1 Press the [REC] button.
2 Turn the dial to select the desired song (U01–
U05) to be cleared.
3 Press the [START/STOP] button two times.
To stop recording, press the [START/STOP] button.
• If the memory becomes full while recording is in progress, “ FL” will appear
in the display and recording will automatically stop.
• Please note that if, in step 3, you select a User Song which has been recorded or
contains data, it will be overwritten with new data.
• While the data is being recorded (“-”appears and moves from left to right on the
display), never interrupt the power supply (e.g., remove the batteries or unplug
the AC adaptor). Doing so can result in a loss of data.
Playing the recorded song
The user songs (UO1–UO5) are located to next to the number 100
(before 001).
Song Clear
To cancel the Clear operation, press the [REC] button again.
The Clear operation will be executed.
• While the data is being cleared (a “-” mark appears and moves from left to right
on the display), never interrupt the power supply (e.g., by removing the batteries
or unplugging the AC adaptor). Doing so can result in loss of data.
NOTE
CAUTION
U01
U01
U01 U02 U04 U05
CAUTION