Filter
Top Products
10
EMX512SC/EMX312SC/EMX212S
Quick Guide
BASIC
7 Turn the MASTER knob in the MAIN section to the posi-
tion.
8 Adjust the LEVEL knobs for all occupied channels.
For each input device you have connected: Generate sound from the device
while adjusting the corresponding channel’s LEVEL knob. Adjust so that the
LEVEL meter occasionally reaches the “0” level.
9 Now turn the MASTER knob in the MAIN section again
as necessary to adjust the overall output level.
This position
It is acceptable for the LIMITER
lamps to flash on briefly at
times, but if they remain lit con-
tinuously then there is risk of
damage to your speakers or to
the internal amp. Reduce the
MASTER knob setting so that
these lamps do not stay on.