Filter
Top Products
EMX5014C Owner’s Manual
29
Reference
Rack Mounting
Rack Mounting
To prepare the unit for rack mounting, use the (separately sold) RK5014 rack mount kit.
If rack-mounting the unit, be sure to maintain adequate ventilation so the unit does not overheat. Consider attaching a vent
panel, and do not use a sealed rack.
The EMX unit requires 12U of rack space.
How to install the rack-mount hardware
Use a screwdriver to remove the screws from the
EMX unit.
Set the kit’s two metal fittings into position, and
screw them in using the screws (silver) included in
the RK5014.
Do not use the screws (black) you just removed from
the EMX unit.
Mount the unit into the rack, and fasten it into place.
Do not install the mixer near power amps or other
heat-generating devices.
NOTE
RK5014 Rack Mount Kit
1
2
3