Filter
Top Products
84
Data Backup & Initialization
Data Backup
Except for the data listed below, all EZ-30 panel settings are reset to their initial settings
whenever the power is turned on. The data listed below are backed up -
i.e. retained in memory - as long as an AC adaptor is connected or a set of batteries is
installed.
• User Song Data • Touch On/Off
• Song Volume • Tuning
• Registration Memory Data • Grade On/Off
• Registration Memory Bank Number • Talking On/Off
• Metronome Volume • Guide Voice On/Off
Data Initialization
All data can be initialized and restored to the factory preset condition by turning on the
power while holding the highest (rightmost) white key on the keyboard.
“CLr Backup” will appear briefly on the display.
1
Press the [STANDBY/ON] switch to turn off the power to the EZ-30.
2
While holding down the highest white key, press the [STANDBY/ON] switch to
turn on the power to the EZ-30 to initialize the data. When initialization is com-
plete, the display indicates “CLr Backup.”
All Registration Memory and User song data, plus the other settings listed
above, will be erased and/or changed when the data initialization procedure is
carried out.
• Carrying out the data initialization procedure will usually restore normal opera-
tion if the EZ-30 freezes or begins to act erratically for any reason.
• Refer to page 74 for information on initializing flash memory.