Filter
Top Products
31
AG-Stomp
1. INPUT sensitivity
2. INPUT sensitivity
3. INPUT sensitivity
4. INPUT sensitivity
5. INPUT sensitivity
6. INPUT sensitivity
7. INPUT sensitivity
8. INPUT sensitivity
9. INPUT sensitivity
10. INPUT sensitivity
11. INPUT sensitivity
12. INPUT sensitivity
13. INPUT sensitivity
14. INPUT sensitivity
15. INPUT sensitivity
16. INPUT sensitivity
17. INPUT sensitivity
18. INPUT sensitivity
19.
MUTE NOISE LEVEL
20.
MUTE NOISE LEVEL
21.
MUTE NOISE LEVEL
22.
MUTE NOISE LEVEL
23.
MUTE NOISE LEVEL
24.
MUTE NOISE LEVEL
25. DISTORTION FACTOR
26. DISTORTION FACTOR
27. DISTORTION FACTOR
28. DISTORTION FACTOR
29. DISTORTION FACTOR
30. DISTORTION FACTOR
31. Digital Out
ITEM INPUT OUTPUT
JK101(INPUT)-10dBm(1kHz)
JK101(INPUT)-10dBm(10kHz)
JK101(INPUT)-10dBm(100Hz)
JK101(INPUT)-10dBm(100Hz)
JK101(INPUT)-10dBm(10kHz)
JK101(INPUT)-10dBm(1kHz)
JK101(INPUT)-10dBm(1kHz)
JK101(INPUT)-10dBm(10kHz)
JK101(INPUT)-10dBm(100Hz)
JK101(INPUT)-10dBm(100Hz)
JK101(INPUT)-10dBm(10kHz)
JK101(INPUT)-10dBm(1kHz)
JK101(INPUT)-10dBm(1kHz)
JK101(INPUT)-10dBm(10kHz)
JK101(INPUT)-10dBm(100Hz)
JK101(INPUT)-10dBm(100Hz)
JK101(INPUT)-10dBm(10kHz)
JK101(INPUT)-10dBm(1kHz)
SW101(INPUT MUTE) -10dBm(1kHz) MUTE SW ON
SW101(INPUT MUTE) -10dBm(1kHz) MUTE SW ON
SW101(INPUT MUTE) -10dBm(1kHz) MUTE SW ON
SW101(INPUT MUTE) -10dBm(1kHz) MUTE SW ON
SW101(INPUT MUTE) -10dBm(1kHz) MUTE SW ON
SW101(INPUT MUTE) -10dBm(1kHz) MUTE SW ON
JK101(INPUT) -10dBm(1kHz)
JK101(INPUT) -10dBm(1kHz)
JK101(INPUT) -10dBm(1kHz)
JK101(INPUT) -10dBm(1kHz)
JK101(INPUT) -10dBm(1kHz)
JK101(INPUT) -10dBm(1kHz)
JK101(INPUT) -10dBm(1kHz)
JK103(OUT L/MONO) +5dBm+/-3dB +HOT
JK103(OUT L/MONO) +5dBm+/-3dB +HOT
JK103(OUT L/MONO) +5dBm+/-3dB +HOT
JK103(OUT L/MONO) +5dBm+/-3dB -COLD
JK103(OUT L/MONO) +5dBm+/-3dB -COLD
JK103(OUT L/MONO) +5dBm+/-3dB -COLD
JK104(OUT R) +5dBm+/-3dB +HOT
JK104(OUT R) +5dBm+/-3dB +HOT
JK104(OUT R) +5dBm+/-3dB +HOT
JK104(OUT R) +5dBm+/-3dB -COLD
JK104(OUT R) +5dBm+/-3dB -COLD
JK104(OUT R) +5dBm+/-3dB -COLD
JK102(HP L) -1.0dBm+/-3dB
JK102(HP L) -1.0dBm+/-3dB
JK102(HP L) -2.0dBm+/-3dB
JK102(HP R) -2.0dBm+/-3dB
JK102(HP R) -1.0dBm+/-3dB
JK102(HP R) -1.0dBm+/-3dB
JK103(OUT L/MONO) -40dB or less +HOT
JK103(OUT L/MONO) -40dB or less -COLD
JK104(OUT R) -40dB or less +HOT
JK104(OUT R) -40dB or less -COLD
JK102(HP L) -45dB or less
JK102(HP R) -45dB or less
JK103(OUT L/MONO) 0.5% or less +HOT
JK103(OUT L/MONO) 0.5% or less -COLD
JK104(OUT R) 0.5% or less +HOT
JK104(OUT R) 0.5% or less -COLD
JK104(OUT L) 0.5% or less
JK104(OUT R) 0.5% or less
JK2(Digital Out) Lch:-8.5dBm+/-3dB, Rch:-8.5dBm+/-3dB
F. CHEKING OF THE ROM VERSION
While pressing the DOWN and MANUAL switches, turn
onthe POWER switch. The model name “AG.S” is
displayed for about 2 seconds. As the version number
“*.**” (each * representing a number) appears after that,
check it. Then the mode will return to the normal mode.
Table1