Filter
Top Products
Operation flow from starting the application to closing it
MOX6/MOX8 Remote Editor Owner’s Manual
3
Operation flow from starting the application to
closing it
The MOX6/MOX8 Remote Editor is a software contained in the MOX6/MOX8 Remote Tools. After installing
the MOX6/MOX8 Remote Editor and related applications by following the Installation Guide of the MOX6/
MOX8 Remote Tools, follow the instructions below. Before starting, make sure that the MOX6/MOX8 is
properly connected to the computer via a USB cable. There is no single way to use the many components in
the MOX6/MOX8 Remote Editor. Your editing needs and preferences may differ; however, the following
example gives you a simple step-by-step guide in how to use the MOX6/MOX8 Remote Editor.
n For details about connection between the MOX6/MOX8 instrument and a computer, refer to the Owner’s Manual of the
MOX6/MOX8.
n On the MOX6/MOX8, press the [UTILITY] to enter the Utility mode, then press the [F6] MIDI followed by the [SF4] OTHER.
On this display, set the MIDI In/Out parameter to “USB,” then press the [STORE] button to store this Utility setting.
n After completing installation of the MOX6/MOX8 Remote Editor, start the DAW software once then quit it. This operation is
necessary to scan through the DAW software for obtaining the VSTi-related information. Only DAW software produced by
Steinberg (such as Cubase) can be scanned.
1. Start the MOX6/MOX8 Remote Editor with the following operations.
Windows
[Start]
[All Programs] [Yamaha MOX6_MOX8 Remote Editor] [MOX6_MOX8
Remote Editor]
Mac
[Applications]
[Yamaha] [MOX6_MOX8] [MOX6_MOX8 Remote Editor]
The Auto Sync window appears and the settings of the 50 Control Templates on the MOX6/MOX8 are
transferred automatically to the Current Bank (page 9) of the MOX6/MOX8 Remote Editor.