Filter
Top Products
MOX6/MOX8 Remote Editor Windows: Edit window
MOX6/MOX8 Remote Editor Owner’s Manual
8
-2 CC (Control Change) section
Assigns the function to the Function Assignment box selected in the Edit section. The setting here is
available when the Remote/CC button is set to “CC.” Clicking “CC” at the left of this section also sets the
Remote/CC button of the Edit section to “CC.”
• CC Number (Control Change Number)
Determines the Control Change number. Selects the Control Change number by clicking one of the scroll
buttons at the right of this box. You can also input the Control Change number directly.
• Display Name
Selects the Knob’s function name which is to be shown on the display of the MOX6/MOX8 when the Remote/
CC button of Edit section is set to “CC.” Click the triangular button at the right of this box, then select the
desired one. You can also input the name directly.
• Display Format
Sets the value format shown on the display of the MOX6/MOX8 to “0 – 127” or “-64 – +63.”
Detail button
Clicking this button closes the Controller Settings section. Click this again to open the Controller Settings
section.
When closing the Controller Settings section